estoy con la idea de comprar un suzuki descapotable, por lo mismo estoy recopilando " insumos " para la modificacion solo de suspencion entre otras cosas, los yugos, motor, cajas seran las misma.
buscando en calmini encontre que tienen un sistema bolt-on para realizar un SPOA, no lo tienen en stock por ahora,
segun se consiguen 6.5" de levante,
A simple way of achieving maximum lift on a straight axle vehicle such as the Samurai has been to go ” Spring Over”. Easier said than done. Grinding old mounts off, fabricating new shock mounts and correct length bump stop extensions from scratch, and trying to weld it all back together correctly makes the conversion a mess for the home installer. Our designers have come up with the answer to this problem. Our new mounting system is a fully bolt-on system that requires no guess work or fabrication to complete at home with simple hand tools. It contains fully bolt-on mounts with built-in correct shock mounting positions, built-in bump stop travel limiters, and leaf spring perches that automatically position the axles correctly for proper steering and drive line angles. This makes the install foolproof. However, the “Spring Over” has other issues that must be addressed in order to maximize its performance. Axle wrap. The increased leverage that is applied to the leaf springs in this configuration tends to deform or “S” curve the stock spring very quickly. Our combo kit includes multi-leaf, military wrap design springs designed for this application. The complete system includes: Full spring mounting system, 4 correct length shocks, steel braided brake lines, 4 springs with full polyurethane bushings, rear boomerang shackles and drive line spacers front & rear. It’s sold complete and ready to assemble. We recommend this kit for the driver that is primarily off road using up to 33” tires. On-road ride quality is fair but not as good as our shackle reversed combinations. We also recommend the use of a Hi-Steer setup to correct steering issues associated with this size suspension system.
alguien tiene alguna informacion ademas de la que sale , si se evitan las soldaduras y vibracion del cardan seria ideal este sistema....
