Ver Mensaje Individual
Antiguo 25-09-2007, 16:14:59   #3
juan andrade
Senior Member
Top 1000
 
Avatar de juan andrade
 
Fecha de Ingreso: Jun 2004
Ubicación: LA UNION
Edad: 54
Mensajes: 1.681
Predeterminado Re: bloqueador EATON para GM12

Cita:
Empezado por Fernando Vliegenthart Ver Mensaje
Vendo bloqueador EATON para GM12 bolt, esta funcionando impecable..........

150.000

http://www.traction.eaton.com/prod2.htm

Mechanical Locking Differential
The Eaton mechanical locking differential was the first to be offered as an option to pickup drivers and today it is known around the world simply by the GM option code G80. This automatic unit, available as standard and optional equipment for rear drive and 4-wheel drive vehicles, makes traction problems a thing of the past. The Locker makes towing large boats and campers a breeze. Be sure to ask your dealer if your vehicle has an Eaton differential.

During lockup, a self-energized clutch system causes a cam plate to ramp against a side gear. This ramping action compresses those disc packs mentioned earlier. The ramping continues until both axles - and therefore both wheels - are spinning at the same speed. This is full lock, and it prevents any further wheel slip. (Note: Axle lockup can only occur at speeds below 20 mph.)
si la descripcion es correcta no sirve para gm 12,solo para eaton .averigua bien y si sirve para gm 12 yo estoy interesado
juan andrade está offline   Responder Con Cita