Samurai version Off Road Hawaii
 

Interesante Samurai para los que les gustan estos ...

http://www.speedhawaii.com/rides/ima...evesuzuki1003/


Algunos Specs:


Owner: Steve
Year: 1988
Manufacturer: Suzuki
Location: Oahu, Hawaii
Color: Custom
Model: Samurai

Awards:
4 Wheel Magazine December 2002

1st Place 2003 Hawaii Top Truck Challenge
Rock Course

Modifications:
Chassis
1988 Suzuki Samurai

Engine
Rebuilt 1988 Suzuki 1300 block
Decked (.010) blue printed and balanced
Stock Bore
Mild Ported Cylinder Head w/ Isky 'High Lift' cam & 2-degrees advance
Center Force 'Dual Friction' Clutch
External Oil Cooler
'Epoxied Solid' Fan

Exhaust
Pacesetter long tube headers 2-1/4" exhaust pipe to a 2-chamber Flowmaster muffler

Fuel
Holly Projection 1D (modified {Don't event attempt
this at home!} ) fitted to a modified stock intake
8-gal tank fuel cell (foam filled)
Moroso Cool Can

Ignition
Stock Distributor set @ 34-degrees total advance
MSD Blaster coil
10 mm Taylor wires w/ heat shield
NGK Iridium IFR6A-11 spark plugs

Transmission
Stock 'oldie, but goodie' 1988

Transfer Case
Sumo 6.1 Gearing

Roll Cage
Custom and full 1/4" steel skid plate w/ 1/8" steel
rocker slider plates
Axle (Front)
Diff. OEM 5.12 w/ mini-spool and 'Double Tough' axles
1/4" thick steel pumpkin cover and 1/4" steel channel welded to bottom of axle tube
3/16" steel front truss w/ Top-Over steering

Axle (Rear)
Diff. OEM 5.12 back (welded) 1/4" pumpkin cover
1/4" steel channel welded to bottom of axle tube and upper outer after spring perch

Steering
Chevy P/S pump (modified for pressure & volume)
Chevy 2x gear box w/ drop pitman arm
AGR 'Rock Ram' power assist
External cooler

Drive Shafts
Driveshaft Solutions 'BIG'

Suspension
8" Lift Coil Spring stretched 4" foward and 4" rearward
Front w/Doetsch Tech shocks (having special 'spherical bearing' in lower end)
Rear w/ Doetsch Tech Coil-Over shocks

Electrical System
Stock alternator
Battery safety shutoff switch
12V dry cell battery

Winch
Ramsey 8,000lb. w/ synthetic rope

Rims and Tires
Steel 2" back spacing w/ sidewall screws on both sides
Micky Thompson Baja Claw 'Competition Rubber Compund = Drag Slick Rubber' 37x12.5x15