TwistedAndes - Nth Degree Front Slider Dana 44 Dana 35 (diff/pinion skid)

http://www.nthdegreemobility.com/cat.../sldr_main.jpg

http://www.nthdegreemobility.com/cat.../sldr_sub2.jpg

:arrow: 1/4" steel construction. It'll take a beating and keep you moving! Contours precisely to the axle housing hiding the flange lip but giving up NONE of your current ground clearance.

:arrow: Bolt on! Most applications attach with three u-bolts (one over the pinion and one on each axle tube next to the trunions).

:arrow: Protects Yoke & Drive Shaft The skid plate extends beyond the pinion to protect the spinning yoke and u-joint. This helps prevent expensive and debilitating breakage from contact with rocks, etc.

:arrow: Differential and Pinion skid plate fits most Dana 44 & 35 axles
Keep wheeling longer with pinion and driveshaft protection

:arrow: Don't get hung up because of your differential flange any more-Slide right over those rocks!

:arrow: The main skid shell is made from 1/4” formed steel and is gusseted to create a rock-proof shield

:arrow: Cut-outs at the rear edge of skid plate allow mud and water to drain and help minimize the accumulation of dirt, etc.

:arrow: Nuevo, nuevo, nuevo...

Valor = $150.000.-